Five steps to select a plastic granulator ideal for your use

1. Before purchasing, clarify the purpose and purpose of purchasing the granulator.
2. Clarify the scope of the budget and determine the amount of investment that can be afforded according to one's financial ability.
3. It is essential to collect the relevant information about the plastic pellet machine and understand it in advance.
4. Decide the type of plastic granulator needed.
5. Looking for a regular and good after-sales service manufacturer.

According to these five steps to choose a plastic granulator, you can buy the right plastic granulator equipment for yourself.

What are the structures of the plastic granulator?

The plastic granulator is composed of the main machine and auxiliary machine. The host is an extruder formed of an extrusion system, a transmission system, and a heating and cooling system. The additional equipment of the plastic granulator mainly includes the pay-off device, the straightening device, the preheating device, the cooling device, the traction device, the meter counter, the spark tester and the wire take-up device.

How is much plant area needed to use the plastic granulator?

The workshop area can be larger or smaller, but the minimum size cannot be less than 150 square meters. Generally speaking, a production line occupies an area of about 20 square meters, and an area greater than 30 square meters is required for stacking, cleaning and crushing waste plastics and plastic pellet products.

Waste plastic granulator or waste plastic granulation unit, mainly including waste plastic extruder, water tank, pelletizer, vibrating screen, crusher, colour mixer, plastic mixer, etc., can be selected according to needs, related plastics There are still a lot of auxiliary machines.

If you purchase a large-scale production line or use several production lines at the same time, the area of the plant will be expanded accordingly. The specific situation can be flexibly controlled according to the investment and production scale.

How much area does the plastic pelletizing machine take to process PE plastic?

1. If the recycled PE film material needs to be sorted, then the plant area will be larger; how large it depends on how large you are; if it is 80 to 100 tons per month, at least 500 square meters or more is required;

2. Poor quality PE film materials, such as agricultural films, need to be cleaned. If there is more vacant land, then the plant can be smaller, broken and cleaned, and no material selection is required. With a scale of 20 to 30 tons per month, the plant is the smallest. It needs to be more than 100 square meters, so the broken cleaning area should also be more than 100 square meters;

3. For the less demanding PE crushing materials, there is no need to crush, clean, select materials and other processes, so the plant area can be smaller. With a scale of 30 tons per month, about 100 square meters is enough, and this is done. The investment in seed material is minimal, the pollution is also tiny, but the profit is relatively low.