General provisions 1. Drivers of transfer machines and plastic crushers must be trained to achieve "three understandings" (understanding structure, performance, and principles), "four meetings" (use, maintenance, maintenance, and troubleshooting). Only after passing the examination and obtaining th......

1. Keep the plastic film agglomeration machine in good condition and clean up the dust and scattered pellets of the pelletizer in time; 2. Check the operation of the plastic film agglomerator at any time, and pay attention to whether there are abnormal noises and blockage of the pelletizing chamb......

Choosing the right plastic film agglomerator pelletizing process needs to consider not only the shape and output of the pellets. For example, the temperature of the particles and the residual humidity are in an opposite proportional relationship; that is, the higher the temperature of the product, t......

It is suitable for the crushing and reuse of various plastics, especially for various hard plastics (such as material ends, shoe lasts, etc.).

1. The plastic crusher and power unit should be installed firmly. If the plastic crusher needs long-term fixed operation, it should be fixed on the cement foundation; if the plastic crusher needs mobile operation, the unit should be installed on the base made of angle iron, and ensure that the power......

1. Before starting, the driving wheel should be moved one or two laps by manpower. After confirming that the movement is flexible, it can be turned on. Wait until the plastic crusher is running normally before feeding.